REKON tripods combine precision engineering, innovative design, and value in support of hunters, precision shooters, military & law enforcement, and photographers. The REKON Carbon Fiber CT-1 Tripod features several key improvements over "adapted for use photography tripods". The NEW REKON CT-1 incorporates unique heavy recoil resistant precision aluminum alloy transition assembly with REKON's proprietary designed reinforcements to critical leg attachment stress areas and leg latch mechanisms. Additionally, by utilizing the included short Center Axis shaft the REKON CT-1 tripod can be optimized for shooting in the prone position or from shooting benches with tripod legs fully retracted and leg angle rotated out to furthest angle detent. The short center axis shaft provides for 2.25 inches of elevation adjustment while shooting prone or bench positions.
Key Features of the REKON CT-1 Carbon Fiber Tripod with BH-1 Ball head, RTA1 Picatinny to Arca-Swiss Mount, and Pig Saddle Mount combo pack
REKON CT-1 Carbon Fiber Tripod:
- Unique heavy recoil resistant precision aluminum alloy transition assembly with REKON's proprietary designed reinforcements to critical stress areas
- Loading weight capacity 35.2 lbs
- Corrosion resistant
- Advanced Lightweight 8-Layer Carbon Fiber Leg Construction
- Featuring 4-Section Tripod legs with 3 length adjustable sections
- Quick secure length adjustment with twist Lock / unlock
- Max leg tube diameter 1.14 inches / 29mm
- Tripod legs can be inverted and folded back 180 degrees to 18 inches making it small enough to carry
- Three selectable leg angle positions provide flexibility and enable shooting in cramped or irregular situations
- Includes 2 removable center axis shafts ("short" & "long") for maximum flexibility and shooting stability
- Long center axis shaft is optimized for widest range of shooting heights and accommodates shooters up to shooters 6ft 10in in height while standing
- Short Center Axis is optimized for shooting in the prone position or from shooting benches with tripod legs fully retracted and leg angle rotated out to furthest angle detent. Additionally, provides for 2.25 inches of elevation adjustment while shooting prone or bench position
- Special full cover Leg latch mechanism design to mitigate sand, dirt or debris intrusion into latching mechanism
- Stability enhancing column hook, located in the bottom of the center axis shaft allows you to hang additional weight from the tripod's center of gravity for increased stability
- Multi-Functional: 3-in-1 tripod, the tripod can be used in the traditional tripod configuration, converted into a full size monopod by screwing together the removable center column and removable tripod leg, or converted to a full size adjustable bi-pod by simply removing the removable leg
- Includes 2 sets of removable camo leg wraps in green woodland and digital desert / grassland for maximum breakup in hunting situations
- Non-slip rubber feet and steel spike feet for all terrain versatility
- Weight (long Extension Pole and BH-1 Ball head): 3 lbs 14.4 oz
Key Features of the REKON BH-1 Ball Head
- Arca-Swiss compatible
- 360 degree panning
- Separate Head adjustment and Pan lock: Individual head tension and lock knob as well as pan lock aid in perfect adjustment settings
- Outside Diameter 46mm
- Heavy duty 36mm ball rated at 35.2lb loading weight
- Precision Aluminum alloy construction
- Extreme cold weather reliability- Ball Head factory sealed with artic cold resistant grease
- Ball Head Quick Release Accessory Plate with 1/4-20 screw interfaces with numerous camera, optic and weapons mounts
- Bubble level
RTA1 Picatinny to Arca-Swiss Adaptor Mount:
REKON Tripod Adapter Picatinny Rail to Arca-Swiss Mount. Quickly attaches to any Arca-Swiss compatible hall-head while providing a direct attachment to Picatinny rails of Mil-STD-1913 or Stanag 4694 / 2324 configuration. Eliminate the added weight and bulk of a vise style weapon mounts with this adapter. Heavy duty and secure - requires 3 open slots on picatinny rail for attachment. ***Picatinny Rail Not Included ***
Key Features:
- Perfect solution for mounting* your AR or Bolt Action directly to your shooting tripod *Requires Picatinny rail *
- Eliminate the added weight and bulk of a \"vise style\" tripod weapon mounts with this adapter
- Fits NATO Accessory Rail Stanag 4694 / 2324 and Mil-STD-1913 Picatinny rails
- CNC machined 6061-T6 Aluminum
- Hard-Anodized
- Arca-Swiss compatible plate
- Compatible with all Arca-Swiss compatible ball-heads
- Requires 3 open slots on picatinny rail for attachment
PIG Saddle Gen2 Mount:
The PIG Saddle Gen2 by Shadow Tech, LLC. Designed by a Marine Scout Sniper and OIF Veteran, a rifle rest tailored to the avid hunter and outdoorsman. Universally mounts to any tripod platform which incorporates 1/4-20 or 3/8-16 thread attachments. (patented)
Features
- Weight: 1.4 lbs
- Steel construction- to facilitate years of dependability
- Melonite finish provides superior corrosion resistance and added rigidity.
- This matte, non-glare finish meets or exceeds stainless steel specifications, is 85% more corrosion resistant than a hard chrome finish, and is 99.9% salt-water corrosion resistant. Only available in black
- CNC machined aluminum knob, OD Green anodized
- UV resistant pads- specifically engineered to absorb rifle recoil and reduce muzzle jump
- Steel 1/4-20 mounting threads and 3/8-16 back up threads
- One handed operation
- Universally mounts to any tripod platform which incorporates 1/4-20 or 3/8-16 thread attachments
- Manufactured in the USA
The REKON CT-1 Carbon Fiber Tripod with BH-1 Ball head, RTA1 Picatinny to Arca-Swiss Mount, and Pig Saddle Mount Pack includes the following:
1x Shadow Tech, LLC, PIG Saddle Mount Gen21x REKON BH1 Ball Head1x REKON Ball Head Quick Release Accessory Plate1x REKON CT1 Tripod2x REKON Center Axis Shafts (long & short)1x REKON RTA1 Picatinny to Arca-Swiss Adaptor Mount2x REKON Sets Camo Leg wraps (green woodland and digital desert/grassland)3x REKON Metal Spike Feet1x REKON Tripod Carry / Storage Bag1x REKON Hex Wrench & Manual  California Proposition 65 Warning: Click Here |
REKON CT-1 Carbon Fiber Tripod with BH-1 Ball Head, RTA1 Picatinny-to-Arca Mount and Pig Saddle Mount FAQ
The REKON CT-1 Carbon Fiber Tripod has a minimum operating height of approximately 10 inches and a maximum height of approximately 68 inches. Its four-section carbon fiber legs, three selectable leg-angle positions, and interchangeable long and short center-axis shafts allow the tripod to be configured for prone, seated, kneeling, bench, and standing shooting positions. This wide adjustment range gives hunters and shooters the flexibility to maintain a stable platform across a variety of terrain and field conditions.
The included REKON BH-1 Ball Head has a loading capacity of 35 pounds. Its heavy-duty 36mm ball, separate tension adjustment, independent pan lock, and Arca-Swiss-compatible quick-release system provide a stable platform for rifles, optics, cameras, spotting scopes, and other equipment. The ball head allows smooth movement while scanning and securely locks into position when it's time to take the shot.
The REKON CT-1 weighs approximately 3 pounds, 14.4 ounces with the BH-1 Ball Head and long center-axis extension shaft installed. The lightweight carbon fiber construction provides excellent portability without sacrificing stability, making it well suited for hunters covering long distances. When folded, the tripod measures approximately 18 inches, allowing it to be easily packed or strapped to a backpack for transportation into the field.
This package includes one REKON CT-1 Carbon Fiber Tripod, one BH-1 Ball Head, one RTA1 Picatinny-to-Arca Mount, one Pig Saddle firearm rest, one ball-head quick-release plate, one long center-axis shaft, one short center-axis shaft, two sets of removable camouflage leg wraps, three removable metal spike feet, one tripod carrying bag, one hex wrench, and an instruction manual. The tripod also comes with installed non-slip rubber feet for use on a variety of surfaces.
The REKON CT-1 is built with lightweight eight-layer carbon fiber legs and a precision aluminum-alloy center assembly designed to withstand demanding hunting conditions. The BH-1 Ball Head is precision machined from aluminum alloy, while the included RTA1 Picatinny-to-Arca Mount is CNC-machined from 6061-T6 aluminum with a durable hard-anodized finish. This combination of materials delivers excellent strength, corrosion resistance, and long-term durability while keeping overall weight to a minimum.
REKON tripods are designed to be extremely versatile for a wide variety of hunting applications. Hunters can scan with binoculars, spotting scopes, thermal optics, or night vision and then quickly transition to a weapon-mounted shooting setup when pursuing big game. The included Pig Saddle and RTA1 Picatinny-to-Arca Mount provide a secure firearm support system, while the lightweight carbon fiber construction and user-friendly interface also make the tripod an excellent shooting rest for predator hunters who frequently move between calling stands.
