Vortex Optics Riflescope Torque Wrench Mounting Kit CTW2

$129.95
(No reviews yet) Write a Review
SKU:
34013
UPC:
843829105620
Shipping:
Calculated at Checkout
Vortex Optics Riflescope Torque Wrench Mounting Kit CTW2

Tighten to the specified torque and not a smidgen more! Adjustable in 1 in/lb increments, this tool is easy to read, simple to set, and offers fast, accurate tension whenever and wherever you need it.

Included in Kit:

  • Screwdriver style Torque Wrench 10-50 in/lbs (1 in/lb increments)
  • 5 Hex Bits
    • 9/64"
    • 3/16" -  Fits Vortex Bobro mounts
    • 2 mm
    • 2.5 mm - Fits Razor Red Dot
    • 3 mm - Fits Hunter rings, CM-202 and CM-203
  • 3 Torx Bits
    • T10
    • T15 - Fits Viper rings and Tactical rings
    • T25 - Fits PMR rings
  • 1 Screwdriver Bit
    • 10 mm wide
  • 1 Socket
    • 1/2 " Socket - Fits Tactical rings
  • 1/4" Socket Adapter
  • Handy storage container

Vortex Optics Riflescope Torque Wrench Mounting Kit (CTW2) FAQ

The Vortex Optics Riflescope Torque Wrench Mounting Kit (CTW2) is designed to properly install riflescopes, scope rings and mounting bases by applying the correct torque to mounting screws. Using the recommended torque values helps ensure a secure installation, maintain proper scope alignment and reduce the risk of damaging your optic or mounting hardware.

Applying the correct amount of torque is essential for a reliable scope installation. Over-tightening can damage screws, scope tubes or mounting components, while under-tightening may allow the optic to shift under recoil. A calibrated torque wrench helps achieve consistent, manufacturer-recommended torque values for dependable performance and repeatable accuracy.

Yes. The Vortex CTW2 is designed for both experienced shooters and first-time scope installers. Its adjustable torque settings and included driver bits make it easy to install optics and mounting hardware with confidence while helping ensure fasteners are tightened to the proper specifications.

The Vortex CTW2 combines a calibrated torque wrench with a comprehensive selection of commonly used driver bits in one convenient kit. Designed specifically for mounting optics and firearm accessories, it provides the precision and consistency needed to install scopes correctly while helping extend the life of your optic and mounting system.

VORTEX Optics - OUR VIP WARRANTY IS ABOUT YOU, NOT US. VIP stands for a Very Important Promise to you, our customer. We will repair or replace your Vortex® product in the event it becomes damaged or defective—at no charge to you. If we cannot repair your product, we will replace it with a product in perfect working order of equal or better physical condition. You see, it doesn't matter how it happened, whose fault it was or where you purchased it. If you ever have a problem, no matter the cause, we promise to take care of you. You can count on the VIP Warranty for all Vortex Optics riflescopes, prism scopes, red dots, rangefinders, binoculars, spotting scopes, tripods and monoculars. UNLIMITED LIFETIME WARRANTY FULLY TRANSFERABLE NO RECEIPT NEEDED The VIP Warranty does not cover loss, theft, deliberate damage or cosmetic damage that does not hinder the performance of the product.