FOXPRO 10AA FUSED Battery Holder

$9.95
(1 review) Write a Review
SKU:
13342
Shipping:
Calculated at Checkout
FOXPRO 10AA Fused Battery Holder

FOXPRO 10AA Fused Battery Holder

Compatible with following FOXPRO Models:

  • Shockwave (see note 1 - Use Alkaline or NiMh batteries only)
  • Hellfire (see note 1 - Use Alkaline or NiMh batteries only)
  • Banshee (see note 1 - Use Alkaline or NiMh batteries only)
  • Screaming Banshee (see note 1 - Use Alkaline or NiMh batteries only)
  • CS24C (see note 1 - Use Alkaline or NiMh batteries only)
  • CS24K Krakatoa II (see note 2 -  use  NiMh batteries only)

 

NOTE 1: Lithium "AA" batteries are NOT recommended for use.  Most currently available Lithium AA size batteries have a high individual cell voltage in the range of 1.7 - 2.0 volts.  This caller is designed with speaker protection circuitry to eliminate the likelihood of damage to the speaker due to over voltage.  The unit will not turn "ON" if it detects a voltage higher than 17 volts.  Because some of the current standard cell Lithium AA batteries start higher than 1.7V (10 cells x 1.7V = 17 volts) this will trip the protective circuit and prevent the unit from operating.

NOTE 2: Alkaline and or Lithium "AA" batteries are NOT recommended for use in the CS24K base unit.  Most currently available modern Lithium & Alkaline AA size batteries have a high individual cell voltage in the range of 1.5 - 2.0 volts.  The CS24K is designed with speaker protection circuitry to eliminate the likelihood of damage to the speaker due to over voltage.  The CS24K will not turn "ON" if it detects a voltage higher than 29.5 volts.  Because some of the current standard cell Lithium AA batteries start higher than 1.7V (20 cells x 1.7V = 34 volts) this will trip the protective circuit and prevent the unit from operating.  In addition, typical new out of the package "AA" alkaline (throw away) batteries will read 1.5 - 1.6 VDC (20 cells x 1.5V = 30 volts) which also will  trip the protective circuit and prevent the unit from operating.

1 Review Hide Reviews Show Reviews

  • 5
    Great design

    Posted by Unknown on 10th Mar 2019

    Thought I was going to have to replace my CS24C after a fox tried to run off with it. Once inspected I realized I could just replace the battery holder. Perfectly designed and thought out by FoxPro. ALLPREDATORCALLS is the place to get it! Great Service!