The A48iC Ambush RED NIGHT HUNTING LIGHT KIT INCLUDES:
- One A48iC Ambush Full Intensity Control Light with Interchangeable LED
- Includes 1 RED Intensity Control LED
- Two Li-Ion rechargeable batteries
- One 2-Position Charger with A/C & DC charge adaptors
- Low Mount (for use with 40mm scope objectives)
- High Mount (for use with 50mm scope objectives)
- Scope mount with picatinny rail for 1" and 30mm tubes
- Intensity Controlled Standard Rheostat Cap
- Intensity Control Coil Cord Rheostat Tail Cap
- Premium Storage and Carry Case
- Instruction manual
- Limited Lifetime Warranty
Successfully target hogs, coyotes, fox, bobcat, raccoon and varmints at night with the Wicked Hunting Lights™ A48iC Ambush Hog & Predator Hunting Night Hunting Light with Intensity Control and Scan & Kill® Technology.. The A48iC is purpose designed & built specifically for night hunting. The A48iC Ambush is not just adapted for use as with virtually all of the competitor lights. In fact a large percentage of "night hunting light companies" are using the exact same light known as a model number HS-802, or clone of it, and just having their name lasered onto the side of it. That's it, that's the extent of their research, development, field testing, design, prototyping, and effort in the development of their brand of night hunting night. In reality the HS-802 is an adequate utility flashlight, but it doesn’t hold a candle to a Wicked Hunting Lights A48iC Ambush
THE A48iC AMBUSH BASIC DESIGN FEATURES:
- Full Intensity Controlled rheostat cap that allow the light to be turned on at ANY power level.
- Purpose built and designed for night hunting.
- Precision machined T6 Aircraft grade aluminum with type III hard anodization.
- Designed, serviced, and warrantied in the USA.
- Our second generation hunting light with Scan & Kill® Technology. Featuring a unique Zoom / Focus design which allows you to focus and or defuse the light beam.
- Full intensity controlled adjustable power output of the LED combined with Zoom / Focus give you absolute control of light output and light intensity depending on the situation and your night hunting style.
- The A48iC Ambush comes in your choice of Green, Red, or White Intensity Control LED (this kit includes RED only). The LED assembly features a 3-year warranty. Uses the same LED as the W403IC and ScanPro iC Headlamp - SKU 20236
- Green LED - Ideal for hogs, general predator hunting (coyote, fox, bobcat)
- Red LED - Ideal for light shy predators (coyote, fox, bobcat) - sold separately
- White LED - Ideal for law enforcement, general predator hunting, alligator, raccoon, other varmints, filming at night, general usage, when extra long-range light is required - sold separately
A48iC Ambush Key Specifications:
- Operation temperature: Minus -30 ~ 120 degrees Fahrenheit.
- Precision machined T6 Aircraft grade aluminum with type III hard anodization.
- O-ring sealed, water resistant.
- Battery type: Operates on 1 18650 PCB 3.7V Lithium-ion battery.
- A48iC Bezel Diameter: 48.0 mm / 1.89 inches.
- A48iC Body Diameter @ scope mount: 25.0 mm / 1.0 inch.
- A48iC Weight one battery installed: 11.3 ounces.
- A48iC Length: 178.0 mm / 7.0 Inches.
- A48iC Length bezel extended to MAX zoom: 188.00 mm / 7.40 Inches.
- Warranty: Limited Lifetime on light Housing. LED assembly three years. Accessories (batteries and charger, mounts, tail caps, cases, etc) one year. See manual for details and limitations.
- The A48iC features a full intensity control tail cap with the ability to power the light on at any desired intensity level.
- The A48iC LED assembly features a 3-year warranty, and can be changed in the field in less than 20 seconds for those wishing to use or experiment with a diffident led color.
- The innovative combination of high magnification convex lens, specially designed LED circuit, and LED module that screws in to mount pad stop combine to eliminate the tedious and frustrating LED light focus adjustment procedure found in many of our competitors designs. No adjustment required - access and change the LED in 20 seconds.
- Weapon mounted light kits include picatinny style scope mount for use with 1 inch or 30mm tubes (also can be used to mount light on shotgun mag extension on many shotguns) and 2 light mounts (1 low mount for use with 40mm objective scopes and 1 high mount for use with 50mm objective scopes).
*Approximate battery life using high quality, fully charged, Wicked Lights 18650 3.7 Li-Ion 2600ma battery. Note: Battery quality varies widely between brands and ma ratings are often grossly exaggerated on cheap batteries.
**Ambient light (moon phase), scope quality & power setting, LED color, battery state of charge, background foliage, rain, snow, and size and color of target species will all affect range.
***Manufacturer specifications are subject to change without notice.
 California Proposition 65 Warning: Click Here |
